A self-supporting steel chimney transmits the lateral forces to the foundation by

Related MCQs

• A self-supporting steel chimney transmits the lateral forces to the foundation by
• The allowable stresses for the design of steel chimney depend upon the ratio of
• A solid steel shaft of 100 mm diameter transmits 100 HP at (450/?) r.p.m. The torque in kg-m on the shaft would be
• Effective length of a chimney of 20 m height is taken as
• Two equal and opposite forces of magnitude 10 kN are applied at the ends of a steel wire to increase its length. The internal force in the wire will be-----KN
• If ES = 3 EA , the stress in steel of a composite bar made of aluminium and steel strips each having a cross sectional area of 300 mm2 and subjected to an axial load of 12 kN
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A steel strip is welded to a copper strip of the same dimensions along the length. The coefficient of thermal expansion for copper is greater than that for steel. If temperature is increased, ___ .
• A flitched beam consists of a wooden joist 150 mm wide and 300 mm deep strengthened by steel plates 10 mm thick and 300 mm deep one on either side of the joist. If modulus of elasticity of steel is 20 times that of wood, then the width of equivalent wooden section will be
• A steel wire is hang vertically under its own weight. What is the greatest length it can have if the allowable tensile stress is 2000 kg/cm2 and specific weight of steel is 8000 kg/cm