For a shear force to be uniform throughout the span of a simply supported beam, it should be subjected to

Related MCQs

• A simply supported beam of span L which carries over its full span a load varying uniformly from zero at either ends to W kg/m at mid-span, will have zero shear force at
• In a simply supported beam of span 3 mts., a point load of 60 kN acts at a distance of 1 mt. from left support, the shear force at 1 mt. from rt. Support is
• A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to
• A beam of T-section is subjected to a shear force of F. The maximum shear force will occur at the
• A beam supported at its both ends is not a simply supported beam.
• A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be
• A simply supported beam 'A' of length l, breadth b and depth d carries a central load W. Another beam 'B' of the same dimensions carries a central load equal to 2 W. The deflection of beam 'B' will be
• A simply supported beam 'A' of length l, breadth b and depth d carried a central point load W. Another bream 'B' has the same length and breadth but its depth is doubled. The deflection of beam 'B' will be double as compared to beam 'A'.
• The shear force in the centre of a simply supported beam carrying a uniformly distributed load of w per unit length, is
• The shear force at the ends of a simply supported beam carrying a uniformly distributed load of w per unit length is