A beam of T-section is subjected to a shear force of F. The maximum shear force will occur at the

Related MCQs

• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is
• The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
• A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
• A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to
• A beam of square cross-section with side 100 mm is placed with one diagonal vertical. If the shear force acting on the section is 10 kN, the maximum shear stress is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• For a shear force to be uniform throughout the span of a simply supported beam, it should be subjected to
• The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is
• The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to