In a three-hinged beam, the bending moment will be zero at

Related MCQs

• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• A prismatic beam fixed at both ends carries a uniformly distributed load. The ratio of bending moment at the supports to the bending moment at mid-span is
• The maximum bending moment for a simply supported beam with a gradually varying load from zero at both ends and w per metre at the centre, lies at the centre of a beam.
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• A simply supported beam of length 1 carries a load varying uniformly from zero at left end to maximum at right end. The maximum bending moment occurs at a distance of
• The shear force and bending moment zre zero at the free end of a cantilever beam, if it carries a
• The shear force at a certain point on a beam changes sign form +ve value to -ve value or vice versa. The bending moment at that point will be zero.
• The bending moment diagram for a cantilever beam of length l and carrying a gradually varying load from zero at the free end and w per unit length at the fixed end is a parabolic curve.
• The bending moment at the centre of a simply supported beam with a gradually varying load from zero at both ends to w per metre at the centre is wl / 4.