The maximum strains at the end of plastic range of structural steel is about

Related MCQs

• A hole, one metre from the end of a structural steel member, is 0.8 mm shy of matching another hole for possible connection. What force, in kN, is necessary to stretch it for connection? The cross section is 25 mm x 3 mm
• A simply supported beam of length 1 carries a load varying uniformly from zero at left end to maximum at right end. The maximum bending moment occurs at a distance of
• Principal strains occur on three planes which are
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A spring steel ribbon 3.2 mm wide, 0.5 mm thick is wound on a 500 mm diameter cylinder. If E = 2 x 105 N/mm2, the maximum stress in the steel will be
• The light gauge steel structural members are usually
• A cantilever beam of length / carries a gradually varying load from zero at free end and w per unit length at the fixed end. The maximum deflection oes at
• The bending moment diagram in case of a cantilever beam carrying a linearly varying load from zero at free end to maximum at supported end will be a
• For a beam of length L fixed at end A and simply supported at end B and loaded uniformly by a load W the maximum bending moment will occur at
• The plastic moment of a beam can be 50 percent more than the maximum elastic moment in case the cross-section of the beam is