In Porous plug experiment the change in temperature of a gas depends upon

Related MCQs

• When a fluid is passed in steady, flow through a porous plug in a duct under such conditions that heat transfer, kinetic energy change and potential change is negligible, the process is called
• One litre of gas A and two litres of gas B. both having same temperature 100?C and same pressure 2.5 bar will have the ratio of kinetic energies of their molecules as
• According to Boyle's law PV = C when the temperature is constant. In this relation the magnitude of C depends upon
• A gas (inversion temperature Ti) undergoing Joule Thomson expansion at temperature T will produce cooling effect only when
• The critical temperature of carbondioside is 31.1?C. If the room temperature is 34.7?C, then carbondioxide at room temperature is
• A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C
• The difference between two specific heats of a gas is equal to universal gas constant
• An elastic sphere of 0.5 m diameter contains a gas at 115 k Pa. Heating of the sphere causes it to increase to 0.62 m and during the process the pressure is proportional to the sphere diameter. The work done by the gas will be
• In a boiler a fusible plug is located at the
• A fusible plug is utilised when