As differentials, heat & work would be described mathematically as

Related MCQs

• A heat engine is supplied with 250 kJ/s of heat at a constant fixed temperature of 227°C. The heat is rejected at 27°C. The cycle is reversible, if the amount of heat rejected is
• Correlate the following statements i) the volume of water into which steam is condensed in condenser is very much smaller than the volume of steam before condensation ii) the net work of a Rankine cycle is heat supplied in boiler - heat rejected to condenser - pump work
• An inventor claims that a new heat cycle will develop 0.4 kW for a heat addition of 32.5 kJ/mm. The temperature of heat source is 1990 K & that of sink is 850K. Is his claim true?
• Mathematically a pure substance can be written as
• During a polytropic expansion 25% of heat is converted into work while temperature of gas rises by 30 K, the specific heat of gas at constant volume is
• During a constant pressure expansion of a gas 33.3 % heat is converted into work while the temperature rises by 20K. The specific heat of gas at constant pressure is
• A simple Rankine cycle produces 40 MW of power, 50 MW of process heat and rejects 60 MW of heat to the surroundings. What is the utilization factor of this co generation cycle neglecting the pump work?
• A Rankine cycle has efficiency of 19.4%. The steam enters the turbine with enthalpy of 32.85 kJ/Kg while heat of water entering the boiler is 423.6 kJ/Kg.the work of the turbine is 560 kJ/ Kg. the pump work is
• a heat engine receives heat at the rate of 1500 kJ/min.& gives an output of 8.2 kW. Its thermal efficiency is equal to
• In a cyclic heat engine operating between a source temperature of 600°C & a sink temperature of 20°C, the least rate of heat rejection per kW net output of the engine is