In distributed amplifiers, all the FET stages in the amplifier are connected in series to one another.

Related MCQs

• Klystron amplifiers have high noise output as compared to crossed field amplifiers.
• Distributed amplifiers offer very high
• If the output power of an amplifier is 10 V, and the input power supplied to the amplifier is 0.229 V given that the DC voltage used is
• If a power amplifier has an output power of 10 W, and an amplifier gain of 16.4 dB, then the input drive power is:
• The klystron tube used in a klystron amplifier is a                    type beam amplifier.
• Amplifier efficiency is the ratio of RF output power to DC input power. This parameter determines the performance of an amplifier.
• In transistor oscillators, FET and BJT are used. Instability is achieved by:
• Behavior of a transistor in power amplifiers is unpredictable at all input signal levels.
• Gain of power amplifiers                      with increase in operating frequency.
•                        amplifiers are linear circuits, where the transistor is biased to conduct over the entire range of the input signal cycle.