In a microwave oscillator, a load of 50+50j is connected across a negative resistance device of impedance -50-50j. Steady state oscillation is not achieved in the oscillator.

Related MCQs

• To achieve stable oscillation, Zin + ZL=0 is the only necessary and sufficient condition to be satisfied by the microwave oscillator.
• The terminal impedance of a dipole antenna is 710 Ω. The terminal impedance of the slot antenna given the intrinsic impedance of air is 377 Ω is:
• For achieving steady state oscillation, the condition to be satisfied in terms of reflection coefficients is:
• In microwave oscillators, negative resistance transistors and diodes are used in order to generate oscillations in the circuit.
• The necessary condition for oscillation in a Colpitts oscillator is:
• In an oscillator, the resonant feedback circuit must have must have a low Q in order to achieve stable oscillation.
• Colpitts oscillator in the feedback section has an inductance of 4 mH and capacitors of 12 nH and 4 nH. Then the resonant frequency of Colpitts oscillator is:
• Any device with negative impedance as its characteristic property can be called:
• In transistor oscillators, the requirement of a negative resistance device is satisfied using a varactor diode.
•                          is a microwave device in which the frequency of operation is determined by the biasing field strength.