is a microwave device in which the frequency of operation is determined by the biasing field strength.

Related MCQs

• In a microwave oscillator, a load of 50+50j is connected across a negative resistance device of impedance -50-50j. Steady state oscillation is not achieved in the oscillator.
• In the plot of reactance v/s frequency of a crystal oscillator, the reactance between series resonant frequency and parallel resonant frequency is:
• The modes of operation of a Gunn diode are illustrated in a plot of voltage applied to the Gunn diode v/s frequency of operation of Gunn diode.
• 1 MICROWAVE PASSIVE COMPONENTS: DIRECTIONAL COUPLER, POWER DIVIDER, MAGIC TEE ATTENUATOR, RESONATOR
• Microwave tubes are power sources themselves at higher frequencies and can be used independently without any other devices.
• Magnetrons are microwave devices that offer very high efficiencies of about 80%.
• High gain is not achievable at microwave frequencies using BJT amplifiers because:
• Noise figure can be defined for any microwave network irrespective of any other constraints.
• In microwave oscillators, negative resistance transistors and diodes are used in order to generate oscillations in the circuit.
• To achieve stable oscillation, Zin + ZL=0 is the only necessary and sufficient condition to be satisfied by the microwave oscillator.