Let c(t) be the unit step response of a system with transfer function K(s+a)/(s+K). If c(0+) = 2 and c(∞) = 10, then the values of a and K are respectively.

Related MCQs

• A particular control system yielded a steady state error of 0.20 for unit step input. A unit integrator is cascaded to this system and unit ramp input is applied to this modified system. What is the value of steady- state error for this modified system?
• The step response of the system is c(t) = 10+8e-t-4/8e-2t . The gain in time constant form of transfer function will be:
• A linear system at rest is subject to an input signal r(t)=1-e-t. The response of the system for t>0 is given by c(t)=1-e-2t. The transfer function of the system is:
• A transfer function has two zeroes at infinity. Then the relation between the numerator(N) and the denominator degree(M) of the transfer function is:
• Determine the sensitivity of the overall transfer function for the system shown in the figure below, at w=1 rad/sec with respect to the feedback path transfer function.
• From the following graphs of the generalized transfer function 1/s+a, which plot shows a transfer function with a bigger value of a?
• From the following graphs of the generalized transfer function 1/as2, which plot shows the transfer function for a higher a?
• For two-phase AC servomotor, if the rotor’s resistance and reactance are respectively R and X, its length and diameter are respectively L and D then,
• If the damping factor is zero, the unit-step response is
• If the impulse response in absolutely integrable then the system is :