McqMate

Q. |
## For an ideal transistor having a fixed bias configuration, what will be the value of Beta? |

A. | 0 |

B. | 2 |

C. | -1 |

D. | 1 |

Answer» C. -1 | |

Explanation: s = 1 + beta s = 0 |

1.3k

0

Do you find this helpful?

14

View all MCQs in

Electronic Circuits 1No comments yet

- 7 BIASING BJT SWITCHING CIRCUITSJFET - DC LOAD LINE AND BIAS POINT, VARIOUS BIASING METHODS OF JFET - JFET BIAS CIRCUIT DESIGN
- For a fixed bias circuit having Ic = 0.3mA and In=0.0003mA, S is
- For a fixed bias circuit having RC=2Kohm and VCC=60V, IB=0.25mA and S=101, find Vce.
- What happens to the h parameters of a transistor when the operating point of the transistor changes?
- For a fixed bias circuit the drain current was 1mA, what is the value of source current?
- Comparing fixed and collector to base bias which of the following statement is true?
- For a fixed bias circuit the drain current was 1mA, VDD=12V, determine drain resistance required if VDS=10V?
- Consider a Darlington amplifier. In the self bias network, the biasing resistances are 220kΩ and 400 kΩ. What can be the correct value of input resistance if hfe=50 and emitter resistance = 10kΩ.
- The base current for a BJT remains constant at 5mA, the collector current changes from 0.2mA to 0.3 mA and beta was changed from 100 to 110, then calculate the value of S.
- For a pnp transistor in the active region the value of Vce (potential difference between the collector and the base) is