McqMate

Q. |
## A Differential Amplifier should have collector resistor’s value (RC1 & RC2) as |

A. | 5kΩ, 5kΩ |

B. | 5Ω, 10kΩ |

C. | 5Ω, 5kΩ |

D. | 5kΩ, 10kΩ |

Answer» A. 5kΩ, 5kΩ | |

Explanation: the values of collector current will be equal in differential amplifier (rc1=rc2). |

1k

0

Do you find this helpful?

1

View all MCQs in

Electronic Circuits 1No comments yet

- Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
- Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
- Increase in collector emitter voltage from 5V to 8V causes increase in collector current from 5mA to 5.3mA. Determine the dynamic output resistance.
- When applying miller’s theorem to resistors, resistance R1 is for node 1 and R2 for node 2. If R1>R2, then for same circuit, then for capacitance for which the theorem is applied, which will be larger, C1 or C2?
- A Differential Amplifier amplifies
- If output is measured between two collectors of transistors, then the Differential amplifier with two input signal is said to be configured as
- A differential amplifier is capable of amplifying
- In ideal Differential Amplifier, if same signal is given to both inputs, then output will be
- Find IC, given VCE=0.77v, VCC=10v, VBE=0.37v and RC=2.4kΩ in Dual Input Balanced Output differential amplifier
- In a Single Input Balanced Output Differential amplifier, given VCC=15v, RE = 3.9kΩ, VCE=2.4 v and re=250Ω. Determine Voltage gain