McqMate

Q. |
## In a Single Input Balanced Output Differential amplifier, given VCC=15v, RE = 3.9kΩ, VCE=2.4 v and re=250Ω. Determine Voltage gain |

A. | 26 |

B. | 56 |

C. | 38 |

D. | 61 |

Answer» A. 26 |

2k

1

Do you find this helpful?

15

View all MCQs in

Electronic Circuits 1
ASK

2 years ago

No

0

- If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.
- Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
- Find IC, given VCE=0.77v, VCC=10v, VBE=0.37v and RC=2.4kΩ in Dual Input Balanced Output differential amplifier
- Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
- Find the 3-dB frequency given that the gain of RC coupled amplifier is 150, the low frequency voltage gain is 100 and the input frequency is 50Hz.
- Consider a voltage amplifier having a frequency response of the low-pass STC type with a dc gain of 60 dB and a 3-dB frequency of 1000 Hz. Then the gain db at
- In a small signal differential gain vs input CM level graph, the gain decreases after V2 due to:
- If output is measured between two collectors of transistors, then the Differential amplifier with two input signal is said to be configured as
- In ideal Differential Amplifier, if same signal is given to both inputs, then output will be
- Given that capacitance w.r.t the input node is 2pF and output node is 4pF, find capacitance between input and output node.