When applying miller’s theorem to resistors, resistance R1 is for node 1 and R2 for node 2. If R1>R2, then for same circuit, then for capacitance for which the theorem is applied, which will be larger, C1 or C2?

Related MCQs

• Given that capacitance w.r.t the input node is 2pF and output node is 4pF, find capacitance between input and output node.
• For the given circuit, input resistance RI = 20Ω, hfe = 50. Output resistance = ∞. Find the new values of input and output resistance, if a base resistance of 2kΩ is added to the circuit.
• Given that transition capacitance is 5 pico F and diffusion capacitance is 80 pico F, and base emitter dynamic resistance is 1500 Ω, find the β cut-off frequency.
• Consider the following circuit, where source current = 10mA, hfe = 50, hie = 1100Ω, then for the transistor circuit, find output resistance RO and input resistance RI.
• If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.
• Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
• For a cascode stage, with input applied to the C.B. stage, the input capacitance gets multiplied by a factor of          
• A transistor has hie =2kΩ, hoe=25µmhos and hfe=60 with an unbypassed emitter resistor Re=1kΩ. What will be the input resistance and output resistance?
• A transistor has hie =1KΩ and hfe=60 with an bypassed emitter resistor Re=1kΩ. What will be the input resistance and output resistance?
• Consider a Darlington amplifier. In the self bias network, the biasing resistances are 220kΩ and 400 kΩ. What can be the correct value of input resistance if hfe=50 and emitter resistance = 10kΩ.