If a C.E. stage has a load Rl and transconductance gm, what is the factor by which the capacitance between the base and the collector at the output side gets multiplied?

Related MCQs

• If a C.E. stage has a load Rl and transconductance gm, what is the factor by which the capacitance between the base and the collector at the input side gets multiplied?
• For a cascode stage, with input applied to the C.B. stage, the input capacitance gets multiplied by a factor of          
• If 1/h12 = 4, for a C.E. stage- what is the value of the base to collector capacitance, after Miller multiplication, at the input side?
• The transconductance of a B.J.T.is 5mS (gm) while a 2KΩ (Rl) load resistance is connected to the C.E. stage. Neglecting Early effect, what is the Miller multiplication factor for the input side?
• Consider an RC coupled amplifier at low frequency. Internal voltage gain is -120. Find the voltage gain magnitude, when given that collector resistance = 1kΩ, load = 9kΩ, collector capacitance is 0. is 0.1μF, and input frequency is 20Hz.
• Given that capacitance w.r.t the input node is 2pF and output node is 4pF, find capacitance between input and output node.
• In a simple follower stage, C2 is a parasitic capacitance arising due to the depletion region between the collector and the substrate. What is the value of C2?
• Given that transition capacitance is 5 pico F and diffusion capacitance is 80 pico F, and base emitter dynamic resistance is 1500 Ω, find the β cut-off frequency.
• Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
• Increase in collector emitter voltage from 5V to 8V causes increase in collector current from 5mA to 5.3mA. Determine the dynamic output resistance.