Considering a four bar chain with each link having linear and angular acceleration, applying D-Alembert’s principle will never result in which of the following member?

Related MCQs

• The flywheel of an engine has a mass of 200 kg and radius of gyration equal to 1 m. The average torque on the flywheel is 1200 Nm. Find the angular acceleration of flywheel and the angular speed after 10 seconds starting from rest.
• Which of the following expression represent the angular acceleration α of the connecting rod?
• The starting torque of the steam engine is 1500 N-m and may be assumed constant, using this data find the angular acceleration of the flywheel in rad/s2.
• While calculating angular acceleration of the connecting rod, sin2(θ) term is neglected.
• In a slider crank mechanism, the length of the crank and connecting rod are 180 mm and 540 mm respectively. The crank position is 45° from inner dead centre. The crank shaft speed is 450 r.p.m. (clockwise), calculate angular velocity of the connecting rod in rad/s.
• A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be
• D-Alembert’s principle is used for which of the following?
• The linear velocity of the reciprocating roller follower when it has contact with the straight flanks of the tangent cam, is given by
• 2 D ALEMBERT'S PRINCIPLE - DYNAMIC ANALYSIS IN RECIPROCATING ENGINES
• The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that