Multi cylinder engines are usually placed at an equal inclination to each other.

Related MCQs

• Multi-cylinder engines are desirable because
• 45 N/mm2. The connecting rod length between centres is 1.2 m and the cylinder bore is 0.5 m. If the engine runs at 250 r.p.m. and if the effect of piston rod diameter is neglected, calculate the net load on piston.
• 2 m and the cylinder bore is 0.5 m. engine runs at 250 r.p.m & 30° from T.D.C. Find the piston effort.
• For a 4 cylinder engine, if the minimum speed of the engine is half the maximum speed, then coefficient of fluctuation is
• For a 4 cylinder engine, when the pressure inside the cylinders exceeds the atmospheric pressure then.
• A negative loop is formed in the turning moment diagram because the pressure inside the cylinder is                than the atmospheric pressure.
• 2 D ALEMBERT'S PRINCIPLE - DYNAMIC ANALYSIS IN RECIPROCATING ENGINES
• The cam follower generally used in automobile engines is
• The cam follower extensively used in air- craft engines is
• For low and moderate speed engines, the cam follower should move with