In a punching press, which of the following quantity is constant?

Related MCQs

• In a punching press, load is 0 at the time of punching.
• The maximum shear force required for punching depends on                  
• A machine punching 38 mm holes in 32 mm thick plate requires 7 N-m of energy per sq. mm of sheared area, find the maximum shear force required.
• Energy during actual punching operation is same as the energy supplied by the motor.
• The balance energy required for punching is supplied by the flywheel by                  
• In the following picture the G is the center of gravity, the quantity h is known as the “offset”. I is the moment of inertia and k is the radius of gyration. Offset’s value is given by?
• If the crank and the connecting rod are 300 mm and 1 m long respectively and the crank rotates at a constant speed of 250 r.p.m., determine the crank angle at which the maximum velocity occurs is          
• A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (fn), respectively, are
• The starting torque of the steam engine is 1500 N-m and may be assumed constant, using this data find the angular acceleration of the flywheel in rad/s2.
• 6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (fn), respectively, are