2m, 0.15m, 0.25m and 0.3m. Angles between consecutive masses = 45, 75 and 135 degrees.

Related MCQs

• 2m, 0.15m, 0.25m and 0.3m. Angles between consecutive masses = 45, 75 and 135 degrees.
• Balancing of single rotating mass by balancing masses in same plane and in different planes cannot take place.
• Centre of masses of the system lies on the axis of rotation.
• Balancing of reciprocating masses is the process of providing the second mass in order to counteract the effect of the centrifugal force of the first mass.
• 45 N/mm2. The connecting rod length between centres is 1.2 m and the cylinder bore is 0.5 m. If the engine runs at 250 r.p.m. and if the effect of piston rod diameter is neglected, calculate the net load on piston.
• A circle drawn with centre as the cam centre and radius equal to the distance between the cam centre and the point on the pitch curve at which the pressure angle is maximum, is called
• The relation between stroke punch s and radius of crank r is              
• The angle between the direction of the follower motion and a normal to the pitch curve is called
• If isolation factor is negative, then what is the phase difference between transmitted and disturbing force?
• The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in