Which power is mentioned on a name plate of a motor?

Related MCQs

• A 50 Hz, 4poles, a single phase induction motor is rotating in the clockwise direction at a speed of 1425 rpm. The slip of motor in the direction of rotation & opposite direction of the motor will be respectively.
• An electric motor is having constant output power. So, motor will have a torque speed characteristic  
• An electric motor is having constant output power. So, motor will have a torque speed characteristic                                                
• If induction motor air gap power is 1.8 KW and gross developed power is .1 KW, then
• If induction motor air gap power is 1.8 KW and gross developed power is .1 KW, then rotor ohmic loss will be                    KW.
• motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?
• starting in an induction motor as well as dc motor.
• An induction motor when started on load, it does not accelerate up to full speed but runs at 1/7th of the rated speed. The motor is said to be  
• An 8-pole, 3-phase, 50 Hz induction motor is operating at a speed of 720 rpm. The frequency of the rotor current of the motor in Hz is  
• A starter is required for a 220-V shunt motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?