[Solved] starting in an induction motor as well as dc motor.

McqMate

Q.	starting in an induction motor as well as dc motor.
A.	induction motor has to control starting torque whereas in dc motor, it is done to avoid large current
B.	to limit starting current in both the machines
C.	to limit starting speed
D.	all of the mentioned
Answer» A. induction motor has to control starting torque whereas in dc motor, it is done to avoid large current
Explanation: for both the machines the purpose is different.

1.6k

0

Do you find this helpful?

14

View all MCQs in

Electrical Drives and Controls (EDC)

Discussion

No comments yet

Related MCQs

A starting resistance is inserted at the starting in an induction motor as well as dc motor.
In shunt and compound motor starting the shunt field should be made on with full starting resistance in
A 100 hp, 250 V, 350 A shunt dc motor with an armature resistance of 0.05 ohms. To limit maximum starting current to twice the rated of its value, what will be the number of stages of starting resistances?
In shunt and compound motor starting the shunt field should be made on with full starting resistance in
A 50 Hz, 4poles, a single phase induction motor is rotating in the clockwise direction at a speed of 1425 rpm. The slip of motor in the direction of rotation & opposite direction of the motor will be respectively.
Which starting method is the worst method in Induction motor?
An induction motor when started on load, it does not accelerate up to full speed but runs at 1/7th of the rated speed. The motor is said to be
An 8-pole, 3-phase, 50 Hz induction motor is operating at a speed of 720 rpm. The frequency of the rotor current of the motor in Hz is
An induction motor when started on load, it does not accelerate up to full speed but runs at 1/7th of the rated speed. The motor is said to be
An 8-pole, 3-phase, 50 Hz induction motor is operating at a speed of 720 rpm. The frequency of the rotor current of the motor in Hz is