- Civil Engineering
- Engineering Graphics
- To represent the object on paper by orth...

Q. |
## To represent the object on paper by orthographic projection the horizontal plane (H.P) should be placed in which way? |

A. | the h.p is turned in a clockwise direction up to 90 degrees |

B. | the h.p is turned in anti-clockwise direction up to 90 degrees |

C. | h.p plane is placed to left side of vertical plane parallel to it |

D. | h.p plane is placed to right side of vertical plane parallel to it |

Answer» A. the h.p is turned in a clockwise direction up to 90 degrees | |

Explanation: the vertical plane and horizontal plane are perpendicular planes intersected at reference line. so on paper to represent perpendicular planes any of the planes should arrange to get a real picture of required projection. |

View all MCQs in:
Engineering Graphics

- A point is in 2nd quadrant, 15 units away from the vertical plane, 10 units away from the horizontal plane and 8 units away from the profile plane. Orthographic projection is drawn. What is the distance from point of front view to point of side view?
- A point is in 4th quadrant, 5 m away from the vertical plane, 1 m away from the horizontal plane and 8 units away from the profile plane. Orthographic projection is drawn. What is the distance from point of front view to point of top view?
- If a square is placed on its base parallel to horizontal plane, and plane containing square is perpendicular to horizontal plane and inclined to vertical plane then the top view gives a line of length equal to side of square.
- A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from the vertical plane and 5 cm from the horizontal plane. What is distance from the point on line far away from the profile plane to profile plane?
- A point is in 2nd quadrant 20 units away from the horizontal plane and 10 units away from the vertical plane. Orthographic projection is drawn. What is the distance from point of front view to reference line, top view point to reference line?
- A point is in 2nd quadrant 15 units away from the vertical plane and 10 units away from the horizontal plane. Orthographic projection is drawn. What is the distance from point of front view to reference line, top view point to reference line?
- A point is in 4th quadrant 10 units away from the horizontal plane and 20 units away from the vertical plane. Orthographic projection is drawn. What is the distance from point of front view to reference line, top view point to reference line?
- A line of length 7 m touching the vertical plane and perpendicular to it at a distance of 2 m away from horizontal plane and 5 m away from the profile plane. Which view gives the distance from line to horizontal plane is 2 m?
- A line is in vertical plane and perpendicular to horizontal plane at a distance of 10 cm from horizontal plane and 5 cm from profile plane. What is the distance from vertical reference line to line?
- A line of length 10 cm at first lied on the horizontal plane parallel to vertical plane and then keeping one of its ends fixed turned 30 degrees with respect to vertical plane and then turned 45 degrees with respect to horizontal plane. What is the length of line in top view?

Login to Continue

It will take less than 2 minutes

Report MCQ