The type of aggregates of same nominal size, which contain less voids when compacted, are

Related MCQs

• If X, Y and Z are the fineness modulli of coarse, fine and combined aggregates, the percentage (P) of fine aggregates to combined aggregates, is
• If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than
• If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is
• If a grading curve is horizontal between the portions of 20 mm I.S. Sieve and 4.75 mm I.S. Sieve, the graded aggregates do not contain
• For given water content, workability decreases if the concrete aggregates contain an excess of
• For the construction of cement concrete dams, the maximum permissible size of the aggregates, is
• The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be
• The size of fine aggregates does not exceed
• In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for
• The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is