- Civil Engineering
- Concrete Technology and Design
- For a simply supported beam of span 15 m...

Q. |
## For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be |

A. | 600 mm |

B. | 750 mm |

C. | 900 mm |

D. | more than 1 m |

Answer» B. 750 mm |

View all MCQs in:
Concrete Technology and Design

- For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is
- For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is
- A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D) is less than
- If the depth of actual neutral axis in a beam is more than the depth of critical neutral axis, then the beam is called
- According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is
- Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to
- The main reason for providing number of reinforcing bars at a support in a simply supported beam is to resist in that zone
- The slab is designed as one way if the ratio of long span to short span is
- If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is
- The limits of percentage p of the longitudinal reinforcement in a column is given by

Login to Continue

It will take less than 2 minutes

Report MCQ