- Civil Engineering
- Concrete Technology and Design
- For a continuous slab of 3 m × 3.5 m siz...

Q. |
## For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is |

A. | 50 mm |

B. | 75 mm |

C. | 100 mm |

D. | 120 mm |

Answer» B. 75 mm |

View all MCQs in:
Concrete Technology and Design

- For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be
- For a cantilever of effective depth of 0.5 m, the maximum span to satisfy vertical deflection limit is
- A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D) is less than
- If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than
- The temperature reinforcement in the vertical slab of a T-shaped R.C. retaining wall is
- According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is
- If the depth of moist sand in a cylinder is 15 cm and the depth of the sand when fully inundated with water is 12 cm, the bulking of the moist sand, is
- If the depth of actual neutral axis in a beam is more than the depth of critical neutral axis, then the beam is called
- If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of column strip and middle strip are
- The limits of percentage p of the longitudinal reinforcement in a column is given by

Login to Continue

It will take less than 2 minutes

Report MCQ