A single mode fiber has a zero dispersion wavelength of 1.21μm and a dispersion slope of 0.08 psnm-2km-1. What is the total first order dispersion at wavelength 1.26μm.

Related MCQs

• A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.
• A single mode fiber has refractive indices n1=1.50, n2= 2.23, core diameter of 8μm, wavelength=1.5μm cutoff wavelength= 1.214μm. Find the radius of curvature?
• A single mode fiber has mode field diameter 10.2μmand V=2.20. What is the core diameter of this fiber?
• A multimode step index fiber has source of RMS spectral width of 60nm and dispersion parameter for fiber is 150psnm-1km-1. Estimate rms pulse broadening due to material dispersion.
• An alternative modification of the dispersion characteristics of single mode fibers involves achievement of low dispersion gap over the low-loss wavelength region between –
• ________ couplers combine the different wavelength optical signal onto the fiber or separate the different wavelength optical signal output from the fiber.
• . A multimode fiber has RMS pulse broadening per km of 12ns/km and 28ns/km due to material dispersion and intermodal dispersion resp. Find the total RMS pulse broadening.
• An optical fiber has a core radius 2μmand a numerical aperture of 0.1. Will this fiber operate at single mode at 600 nm?
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.