The fiber should be________________ to avoid deterioration of the optical transmission characteristics resulting from mode-coupling-induced micro-bending.

Related MCQs

• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.
• ________ couplers combine the different wavelength optical signal onto the fiber or separate the different wavelength optical signal output from the fiber.
•  For many applications which involve optical fiber transmission, an intensity modulation optical source is not required. State whether the given statement is true or false.
• A most important velocity in the study of transmission characteristics of optical fiber is
• An optical fiber has a core radius 2μmand a numerical aperture of 0.1. Will this fiber operate at single mode at 600 nm?
• The optical fiber incurs a loss in signal power as light travels down the fiber which is called as
• A 4 km optical link consists of multimode step index fiber with core refractive index of 1.3 and a relative refractive index difference of 1%. Find the delay difference between the slowest and fastest modes at the fiber output.