The cable must be designed such that the strain on the fiber in the cable does not exceed__________

Related MCQs

• When the stranding approach consists of individual elements (e.g. single-fiber or multi fiber loose tube buffer) than the cable is termed as
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• An inclusion of one or more structural members in an optical fiber so as to serve as a cable core foundation around which the buffer fibers may be wrapped is called _____________
• An optical fiber has a core radius 2μmand a numerical aperture of 0.1. Will this fiber operate at single mode at 600 nm?
• A single mode fiber has mode field diameter 10.2μmand V=2.20. What is the core diameter of this fiber?
• The optical fiber incurs a loss in signal power as light travels down the fiber which is called as
• A multimode step index fiber has source of RMS spectral width of 60nm and dispersion parameter for fiber is 150psnm-1km-1. Estimate rms pulse broadening due to material dispersion.
• A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.