A particular GaAs fiber has a Fresnel reflection magnitude of 17.6% i.e. 0.176. Find the power loss between the source and the fiber?

Related MCQs

• A GaAs optical source having a refractive index of 3.2 is coupled to a silica fiber having a refractive index of 1.42. Determine Fresnel reflection at interface in terms of percentage.
• The insertion losses of the fiber splices are much less than the Fresnel reflection loss at a butted fiber joint. State whether the given statement is true or false.
• Estimate optical power coupled into fiber of DH SLED having emission area of 1.96*10-5, radiance of 40 W/rcm2, numerical aperture of 0.2 and Fresnel reflection coefficient of 0.03 at index matched fiber surface.
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• The total efficiency of an injection laser with GaAs active region is 12%. The applied voltage is 3.6 V and band gap energy for GaAs is 2.34 eV. Determine external power efficiency.
• A GaAs injection laser with an optical cavity has refractive index of 3.6. Calculate the reflectivity for normal incidence of the plane wave on the GaAs-air interface.
• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• Determine coupling efficiency into the fiber when GaAs LED is in close proximity to fiber core having numerical aperture of 0.3
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?