Estimate optical power coupled into fiber of DH SLED having emission area of 1.96*10-5, radiance of 40 W/rcm2, numerical aperture of 0.2 and Fresnel reflection coefficient of 0.03 at index matched fiber surface.

Related MCQs

• A GaAs optical source having a refractive index of 3.2 is coupled to a silica fiber having a refractive index of 1.42. Determine Fresnel reflection at interface in terms of percentage.
• Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber.
• If a particular optical power is coupled from an incoherent LED into a low-NA fiber, the device must exhibit very high radiance . State whether the given statement is true or false.
• A particular GaAs fiber has a Fresnel reflection magnitude of 17.6% i.e. 0.176. Find the power loss between the source and the fiber?
• An optical fiber has a core radius 2μmand a numerical aperture of 0.1. Will this fiber operate at single mode at 600 nm?
• Determine coupling efficiency into the fiber when GaAs LED is in close proximity to fiber core having numerical aperture of 0.3
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• The insertion losses of the fiber splices are much less than the Fresnel reflection loss at a butted fiber joint. State whether the given statement is true or false.
• A multimode step-index fiber has a core refractive index of 1.5 and relative refractive index difference of 1%. The length of the optical link is 6 km. Estimate the RMS pulse broadening due to intermodal dispersion on the link.