The heating of the two prepared fiber ends to their fusing point with the application of required axial pressure between the two optical fibers is called as

Related MCQs

• The heating of the two prepared fiber ends to their fusing point with the application of required axial pressure between the two optical fibers is called as
• The rounding of the fiber ends with a low energy discharge before pressing the fibers together and fusing with a stronger arc is called as
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• _____________ is caused by surface tension effects between the two fiber ends during fusing.
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?
• A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.
• ________ couplers combine the different wavelength optical signal onto the fiber or separate the different wavelength optical signal output from the fiber.
•  For many applications which involve optical fiber transmission, an intensity modulation optical source is not required. State whether the given statement is true or false.
• Two joined graded index fibers that are perfectly aligned have refractive indices αR=1.93for receiving fiber αE= 2.15 for emitting fiber. Calculate the coupling loss