The radiation emission process (emission of a proton at frequency) can occur in __________ ways.

Related MCQs

• An incandescent lamp is operating at a temperature of 1000K at an operating frequency of 5.2×1014 Hz. Calculate the ratio of stimulated emission rate to spontaneous emission rate.
• A DH surface emitter LED has an emission area diameter of 60μm. Determine emission area of source
• The frequency of the absorbed or emitted radiation is related to difference in energy E between the higher energy state E2 and the lower energy state E1. State what h stands for in the given equation?
• When three wave components co-propagate at angular frequency w1, w2, w3, then a new wave is generated at frequency w4, which is given by
• __________________ in the laser occurs when photon colliding with an excited atom causes the stimulated emission of a second photon.
• _________________ is used when the optical emission results from the application of electric field.
• Stimulated emission by recombination of injected carriers is encouraged in
• The spectral width of emission from the single mode device is
• Auger current is mostly ___________________ for material with band gap providing longer wavelength emission.
• Compute power internally generated within a double-heterojunction LED if it has internal quantum efficiency of 64.5 % and drive current of 40 mA with a peak emission wavelength of 0.82 μm.