_________________ laser can be produced when a coupler section is introduced between the amplifier and phase sections of a structure

Related MCQs

• An injection laser has active cavity losses of 25 cm-1and the reflectivity of each laser facet is 30%. Determine the laser gain coefficient for the cavity it has a length of 500μm.
• The thulium doped fiber laser when pumped with alexandrite laser output at 0.786 μm, the laser emits at
• Some refractive index variation is introduced into lateral structure of laser. State whether the given statement is true or false.
• The Nd: YAG laser is costlier than earth-doped glass fiber laser. State whether the following statement is true or false
• How many sections are included in a sampling grating distributed Bragg-reflector laser (SG-DBR)?
• A four-port multimode fiber FBT coupler has 50 μWoptical power launched into port 1. The measured output power at ports 2,3 and 4 are 0.003, 23.0 and 24.5 μW respectively. Determine the excess loss.
• A monochromatic wave propagates along a waveguide in z direction. These points of constant phase travel in constant phase travel at a phase velocity Vp is given by
• A four-port FBT coupler has 60μW optical power launched into port one. The output powers at ports 2, 3, 4 are 0.0025, 18, and 22 μW respectively. Find the split ratio?
• The InGaAsP/InP double channel planar DFB-BH laser with a quarter wavelength shifted first order grating provides a single frequency operation and incorporates a phase shift of ______________
• Calculate the splitting loss if a 30×30 port multimode fiber star coupler has 1 mW of optical power launched into an input port.