Calculate the splitting loss if a 30×30 port multimode fiber star coupler has 1 mW of optical power launched into an input port.

Related MCQs

• A four-port multimode fiber FBT coupler has 50 μWoptical power launched into port 1. The measured output power at ports 2,3 and 4 are 0.003, 23.0 and 24.5 μW respectively. Determine the excess loss.
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• A number of three-port single-mode fiber couplers are used in the fabrication of a ladder coupler with 16 output ports. The three-port couplers each have an excess loss of 0.2 dB along with a splice loss of 0.1 dB at the interconnection of each stage. Determine the excess loss.
• A four-port FBT coupler has 60μW optical power launched into port one. The output powers at ports 2, 3, 4 are 0.0025, 18, and 22 μW respectively. Find the split ratio?
• Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber.
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• . When the input and output power in an optical fiber is 120μW & 3μW respectively and the length of the fiber is 8 km. What is the signal attenuation per km for the fiber?
• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.
• The overall power conversion efficiency of electrical lens coupled LED is 0.8% and power applied 0.0375 V. Determine optical power launched into fiber