A planar LED fabricated from GaAs has a refractive index of 2.5. Compute the optical power emitted when transmission factor is 0.68.

Related MCQs

• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• A GaAs optical source having a refractive index of 3.2 is coupled to a silica fiber having a refractive index of 1.42. Determine Fresnel reflection at interface in terms of percentage.
• A GaAs injection laser with an optical cavity has refractive index of 3.6. Calculate the reflectivity for normal incidence of the plane wave on the GaAs-air interface.
• A multimode step-index fiber has a core refractive index of 1.5 and relative refractive index difference of 1%. The length of the optical link is 6 km. Estimate the RMS pulse broadening due to intermodal dispersion on the link.
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• A 4 km optical link consists of multimode step index fiber with core refractive index of 1.3 and a relative refractive index difference of 1%. Find the delay difference between the slowest and fastest modes at the fiber output.
• For a GaAs LED, the coupling efficiency is 0.05. Compute the optical loss in decibels.
• Losses caused by factors such as core-cladding diameter, numerical aperture, relative refractive index differences, different refractive index profiles, fiber faults are known as
• A double-channel planar buried hetero-structure (DCP BH) has a planar active region, the confinement material is
• A step-index fiber has core refractive index 1.46 and radius 4.5μm. Find the cutoff wavelength to exhibit single mode operation. Use relative index difference as 0.25%.