The output indicated on the name plate of any motor is always the:

Related MCQs

• A 4 pole, 250V series motor has a wave connected armature with 1254 conductors. The flux per pole is 22mWb when the motor taking 50A. Iron and friction lossses amount to 1000W. Armature resistance 0.2Ω, series field resistance 0.2Ω. What is the output power in H.P.
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• The output power of any electrical motor is taken from the:
• The d.c. series motor should always be started with load because
• The speed of rotor of an induction motor is always ………………… synchronous speed.
• If the back emf in a dc motor varnishes suddenly, then the motor:
• A thick wire is used in dc series motor field winding than that in dc shunt motor:
• A DC shunt motor is driving a constant torque load. On inserting an additional resistance in the armature circuit, the speed of the motor will:
• A flywheel is employed with a dc compound motor to reduce the peak demand, the compound motor should be:
• The shaft torque in a DC motor is less than total armature torque because of ____in the motor