The DC motor, which can provide zero speed regulation at full load without any controller is

Related MCQs

• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A DC motor runs at 1725rpm at full load and 1775rpm at no load. The speed regulation is _____.
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• A 3 phase I.M. is running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then ratio of full load torque to starting torque is _____.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. If voltage between the slip rings on open circuit is 520V then the torque developed on full load is ___ Nm.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• A 440V, 20HP, 3phase motor operates at full load, 88% efficiency and 0.65 power factor lagging, the current drawn by motor is
• A 3 phase I.M. is running with speed 1455 rpm on full load then its synchronous speed must be ____ rpm.