When load is placed in three phase induction motor its current

Related MCQs

• When load is placed in three phase induction motor, its speed
• When load is placed in three phase induction motor, its torque
• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• When load is connected to three phase induction motor is increased, then its slip
• When load is connected to three phase induction motor is increased, then its rotor induced emf
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A shunt motor runs at 500rpm on a 200V circuit. Its armature resistance is 0.5Ω and the current taken is 30A in addition to field current. What resistance must be placed in series with armature circuit to reduce to speed to 300 rpm; the current in armature remains same.
• A 3-phase, 4-pole induction motor has a no-load slip of 2% when connnected to a 25 Hz source, the no-load speed in rpm is
• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?