The maximum voltage is induced in the rotor of 3-ph induction motor when it----

Related MCQs

• A wound rotor induction motor can be distinguished from a squirrel cage induction motor by
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• When load is connected to three phase induction motor is increased, then its rotor induced emf
• A 4 pole, 50Hz induction motor runs at a speed of 1440rpm. The frequency of the rotor induced emf is _____.
• The speed of rotating field due to rotor currents relative to rotor surface in an induction motor is
• The rotor standstill resistance and reactance of an induction motor are 0.5Ω and 2.5Ω hence the rotor impedance at 5% slip is____.
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• When an induction motor is running at full load, rotor reactance is ------rotor resistance
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• Maximum torque during running condition developed by three phase induction motor can be obtained by changing rotor resistance