On which of the factors does the co-efficent of bend in a pipe depend?

Related MCQs

• According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe)
• The diameter of the nozzle (d) for maximum transmission of power is given by (where D = Diameter of pipe, f = Darcy’s coefficient of friction for pipe, and l = Length of pipe)
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• The distance y from pipe boundary, at which the point velocity is equal to average velocity for turbulent flow, is (where R is radius of pipe.)
• The distance from pipe boundary, at which the turbulent shear stress is one-third die wall shear stress, is (where R is the radius of pipe.)
• The loss of head at entrance in a pipe is (where v = Velocity of liquid in the pipe)
• The efficiency of power transmission through pipe is (where H = Total supply head, and hf = Head lost due to friction in the pipe)
• A liquid flows with the same velocity through two pipes 1 and 2 having the same diameter. If the length of the second pipe be twice that of the first pipe, what should be the ratio of the head loss in the two pipes?
• When time of closure tc = L/v0 (where L is length of pipe and v0 is speed of pressure wave), the portion of pipe length subjected to maximum head is
• The length of a pipe is 1 km and its diameter is 20 cm. If the diameter of an equivalent pipe is 40 cm, then its length is