Where is the turbine not used?

Related MCQs

• In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?
• In Pelton turbine the ratio of volume available at shaft of turbine and power supplied at the inlet of the turbine is               
• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
• Which energy generated in a turbine is used to run electric power generator linked to the turbine shaft?
• The volume flow rate into a Francis turbine is Q m3/s. 0.25Q m3/s volume of water do not flow over the runner blades. What is the mechanical efficiency of the turbine (in %)?
• The volume flow rate into a Kaplan turbine is Q m3/s. 0.10Q m3/s volume of water do not flow over the runner blades. What further information is required to find the volumetric efficiency (numerical value) of the Kaplan turbine?
• 95*40 = 38 m3/s. 358. In a Kaplan turbine experiment, the volumetric efficiency of a given turbine is 91%. If volume flow rate of water in given to be 35 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?
• The speed ratio of an impulse turbine operating under a head off 400m is 0.46. The p.c.d of turbine wheel is 22.25m then rotational speed, in rpm is
• Specific speed of the turbine is defined as the speed at which the turbine runs when