In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?

Related MCQs

• is a axial flow reaction turbines, if vanes are fixed to hub of turbine
• The flow ratio of a Kaplan turbine is given as 0.7. The available head is 30 m. The outer diameter of the runner is 3.5 m and the hub diameter is 2 m. Find the volume of water flowing through the turbine per second (m3/s)?
• Which of the following profiles are used for guide vanes to ensure smooth flow without separation?
• High head, low head and medium head turbines are classified based on
• The velocity of flow through a Kaplan turbine is 10 m/s. The outer diameter of the runner is 4 m and the hub diameter is 2 m. Find the volume flow rate of the turbine in m3/s?
• allow the water to strike the vanes fixed on runner without shock at inlet
• is a circular wheel on which a series of smooth, radial curved vanes are fixed.
• In which of following turbine inlet and outlet blade velocities of vanes are equal?
• When the thicknesses of vanes are to be considered in the discharge of a turbine, what will be the area under consideration?
• The whirl velocity of water at the inlet of the Kaplan turbine is 15 m/s. The velocity of water at inlet of the turbine is 20 m/s. Find the guide vane angle at inlet (In degrees).