If velocity is zero over l/3rd of a cross-section and is uniform over remaining 2/3rd of the cross-section, then the correction factor for kinetic energy is

Related MCQs

• Least possible value of correction factor for i) kinetic energy is zero ii) kinetic energy is 1 iii) momentum is zero iv) momentum is 1 The correct statements are
• If the velocity is zero over half of the cross-sectional area and is uniform over the remaining half, then the momentum correction factor is
• When the velocity distribution is uniform over the cross-section, the correction factor for momentum is
• If energy available at inlet of turbine is only kinetic energy then it is classified based on
• The reaction turbine is one in which the available hydraulic energy is converted to kinetic energy before the fluid enters the runner
• The depth ‘d’ below the free surface at which the point velocity is equal to the average velocity of flow for a uniform laminar flow with a free surface, will be (where D is the depth of flow.)
• Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
• means the angle made by absolute velocity with the tangent on the wheel is 90 degrees and the component of whirl velocity is zero.
• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• Power developed by Francis turbine are calculated for a certain set of conditions. Now, the inlet whirl velocity is doubled, the blade velocity at inlet is doubled and the flow velocity is quartered. The power developed: