The mass per unit volume of a liquid at a standard temperature and pressure is called

Related MCQs

• The weight per unit volume of a liquid at a standard temperature and pressure is called
• A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid)
• A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm² and a volume of 0.039 m3 at 150 kg/cm². The bulk modulus of elasticity of liquid is
• The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid)
• The ratio of quantity off liquid discharged per second from the pump to the quantity of liquid passing per second through the impeller is known as
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is
• The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called
• A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is
• The volumetric efficiency of a given turbine is 80%. If volume flow rate of water in given to be 30 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?