In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed in m/min, V is

Related MCQs

• A CNC Lathe is usually a machine tool with Z axes is…..
• n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are
• The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?
• The machine tool, in which calculation and setting of the operating conditions like depth of cut, feed, speed are done during the machining by the control system itself, is called
• In laminated object manufacturing (LOM), which of the following cutting strategy is preferable?
• If point are expressed in homogeneous coordinates then the pair of (x, y) is represented as
• General pivot point rotation can be expressed as
• A cylinder can be created by drawing a rectangular shape using the ________ tool.
• During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0 the type of tool motion will be
• he depth that the tool is plunged into the surface is called as