n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are

Related MCQs

• The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?
• Circular motion along an axis is known as ____ in robotics.
• Up and down motion along an axis known as ____ in robotics
• The machine tool, in which calculation and setting of the operating conditions like depth of cut, feed, speed are done during the machining by the control system itself, is called
• In CNC machining tool radius compensation turning the left mode ON programming contour done by
• During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0 the type of tool motion will be
• The lost motion in CNC machine tool is on account of
• A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4 units in y-direction. Calculate new coordinates of points B.
• Rotation is simply---------object w.r.t origin or centre point.
• In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be