The machine tool, in which calculation and setting of the operating conditions like depth of cut, feed, speed are done during the machining by the control system itself, is called

Related MCQs

• n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are
• In CNC machining tool radius compensation turning the left mode ON programming contour done by
• The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?
• In the lathe it is the peripheral speed of the work piece cutting speed of tool is expressed in m/min, V is
• he depth that the tool is plunged into the surface is called as
• In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be
• CNC machining centres do not include operations like
• XY Plane Selection in CNC machining is done by…..
• In how many ways CNC machine tool systems can be classified?
• A CNC Lathe is usually a machine tool with Z axes is…..