[Solved] Secondary forces in reciprocating mass on engine frame are

Q.	Secondary forces in reciprocating mass on engine frame are
A.	of same frequency as of primary forces
B.	twice the frequency as of primary forces
C.	four times the frequency as of primary forces
D.	none of the mentioned
Answer» B. twice the frequency as of primary forces

Do you find this helpful?

View all MCQs in

Dynamics of Machinery

Discussion

No comments yet

Related MCQs

A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 11.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 23 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 34.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
From the following data of a 60 degree V-twin engine, determine the minimum value for primary forces in newtons:Reciprocating mass per cylinder = 1.5 Kg Stroke length = 10 cm Length of connecting rod = 25 cm Engine speed = 2500 rpm
From the following data of a 60 degree V-twin engine, determine the maximum value for primary forces in newtons:Reciprocating mass per cylinder = 1.5 Kg Stroke length = 10 cm Length of connecting rod = 25 cm Engine speed = 2500 rpm
In order to achieve stability, the sum of secondary forces and secondary couples must be ------- and their respective polygons must be …......
The numerical values of the secondary forces and secondary couples couples may be obtained by considering the ___________
In a multicylinder inline engine, each imaginary secondary crank with a mass attached to the crankpin is inclined to the line of stroke at which angle?
Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.
Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______