From the following data of a 60 degree V-twin engine, determine the maximum value for primary forces in newtons:Reciprocating mass per cylinder = 1.5 Kg Stroke length = 10 cm Length of connecting rod = 25 cm Engine speed = 2500 rpm

Related MCQs

• From the following data of a 60 degree V-twin engine, determine the minimum value for primary forces in newtons:Reciprocating mass per cylinder = 1.5 Kg Stroke length = 10 cm Length of connecting rod = 25 cm Engine speed = 2500 rpm
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 11.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 23 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 34.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
• From the given data, calculate the unbalanced centrifugal force in N s2 Distance from shaft = 0.2 m Mass = 100 kg Rotating speed = 1000 rpm.
• In a locomotive, the ratio of the connecting rod length to the crank radius is kept very large in order to
• A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
• A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a two node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
• In a multicylinder inline engine, each imaginary secondary crank with a mass attached to the crankpin is inclined to the line of stroke at which angle?
• The primary unbalanced force is maximum when the angle of inclination of the crank with the line of stroke is